View AA210-25_4616796.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
AA210-25, AA210-25LF: GaAs IC 4-Bit Digital Attenuator 1 dB LSB 300 kHz-2 GHz
Features
Attenuation 1 dB steps to 15 dB with high accuracy Low intermodulation products Low-cost SOIC-16 plastic package Low DC power consumption Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 C per JEDEC J-STD-020
Block Diagram
J1 V8 V7 V6 V5 V4 2 dB V3 4 dB 8 dB
Description
The AA210-25 is an IC FET digital attenuator consisting of four monolithic attenuators with LSB of 1 dB and a total attenuation of 15 dB with all attenuators connected. Attenuator bits are switched with -5 and 0 V. The AA210-25 is particularly suited where high attenuation accuracy, low insertion loss, and low intermodulation products are required. Typical applications include cellular, radio, wireless data, wireless local loop, and other gain/level control circuits.
V2 V1 J2 1 dB
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging.
Electrical Specifications at 25 C (0, -5 V)
Parameter(1) Insertion loss(2) Frequency 300 kHz-0.1 GHz 300 kHz-0.5 GHz 300 kHz-1.0 GHz 300 kHz-2.0 GHz 300 kHz-1.0 GHz 300 kHz-2.0 GHz VSWR (I/O)
1. All measurements made in a 50 system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/C. 3. Attenuation referenced to insertion loss.
Min.
Typ. 0.9 1.1 1.3 2.1 15
Max. 1.2 1.5 1.8 2.5
Unit dB dB dB dB dB dB dB
Attenuation range Attenuation accuracy(3)
(0.25 + 3% of attenuation setting in dB) (0.4 + 5% of attenuation setting in dB) 1.3:1 1.6:1 1.4:1 1.8:1
300 kHz-1.0 GHz 300 kHz-2.0 GHz
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
200211 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * December 12, 2005
1
DATA SHEET * AA210-25, AA210-25LF
Operating Characteristics at 25 C (0, -5 V)
Parameter Switching characteristics Rise, fall On, off Video feedthru Input power for 1 dB compression Intermodulation Iintercept point (IP3) Control voltages For two-tone input power 5 dBm VLOW = 0 to -0.2 V @ 10 A typ. VHIGH = -5 @ 10 A Typ. to -8 V @ 200 A typ. Condition 10/90% or 90/10% RF 50% CTL to 90/10% RF TRISE = 1 ns, BW = 500 MHz 0.5-2 GHz 0.05 GHz 0.5-2 GHz 0.05 GHz Frequency Min. Typ. 15 25 25 28 22 48 38 Max. Unit ns ns mV dBm dBm dBm dBm
Typical Performance Data (0, -5 V)
4 2.0 1.8 1.6
3
dB
2 1.4 1 1.2
8 dB State
4 dB State 1 dB State 2 dB State 15 dB State
0 0 0.5 1 1.5 2.0
1.0 0
Insertion Loss 0.5 1 1.5 2.0
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
18
VSWR vs. Frequency
Pin Out
J1
16
GND GND GND GND GND GND
15 14 13 12 11 10
J2
9
12
dB
8 dB
4 dB
2 dB
1 dB
6
1 2 3 4 5 6 7 8
V8
V7
V6
V5
V4
V3
V2
V1
0
0
0.5
1.0
1.5
2.0
Frequency (GHz)
Attenuation vs. Frequency (All States)
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2
December 12, 2005 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200211 Rev. B
DATA SHEET * AA210-25, AA210-25LF
Absolute Maximum Ratings
Characteristic RF input power Control voltage Operating temperature Storage temperature Value 1.5 W > 500 MHz 0/-8 V 0.5 W @ 50 MHz 0/-8 V +0.2 V, -8 V -40 C to +85 C -65 C to +150 C
Truth Table
V1 -5 0 -5 -5 -5 0 V2 0 -5 0 0 0 -5 V3 -5 -5 0 -5 -5 0 V4 0 0 -5 0 0 -5 V5 -5 -5 -5 0 -5 0 V6 0 0 0 -5 0 -5 V7 -5 -5 -5 -5 0 0 V8 0 0 0 0 -5 -5 1 dB 2 dB 4 dB 8 dB Attenuation J1-J2 Reference I. L. 1 dB 2 dB 4 dB 8 dB 15 dB
Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
SOIC-16
Pin 16 0.050 (1.27 mm) BSC
Pin 1 Indicator
0.244 (6.20 mm) 0.228 (5.80 mm)
Pin 1
0.020 (0.51 mm) 0.013 (0.33 mm) 0.049 (1.24 mm) 0.016 (0.41 mm)
Recommended Solder Reflow Profiles
Refer to the "Recommended Solder Reflow Profile" Application Note.
0.068 (1.73 mm) Max.
0.016 Max. (0.41 mm) x 45 Chamfer 8 Max.
0.394 (10.00 mm) 0.386 (9.80 mm)
Tape and Reel Information
Refer to the "Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation" Application Note.
0.010 (0.25 mm) 0.004 (0.10 mm)
0.0098 (0.25 mm) 0.0075 (0.19 mm)
0.158 (4.00 mm) 0.150 (3.80 mm)
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
200211 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * December 12, 2005
3
DATA SHEET * AA210-25, AA210-25LF
Copyright (c) 2002, 2003, 2004, 2005, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4
December 12, 2005 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200211 Rev. B

▲Up To Search▲

Price & Availability of AA210-25

	To Download AA210-25 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .